Six into one, multi-media matrix switcher

The SRP-X700 has a 'six into one' matrix switcher that allows a wide range of audio, video and PC graphics material to be switched from source devices to the presentation system. The SRP-X700 is able to handle modern presentation material such as PC graphics and DVD video and surround sound audio. The 'six into one' matrix size mean that the SRP-X700 can handle switching in medium to large scale presentation systems

14 channel audio mixing with extensive processing to maximise sound quality

The SRP-X700 can mix and process a total of 14 mono inputs signals (six microphones, a stereo line and the six channel output of the matrix switcher) to 10 outputs (8 general purpose outputs and a stereo record output). Comprehensive audio processing, such as EQ, dynamics, routing and programmable delay, allows the various audio sources to be balanced and enhanced to match the acoustics of the presentation venue.

On board 'feedback reducer' and automixer.

Two special audio processing tools are included to allow 'professional quality audio' processing to be setup at the touch of a button. The 'feedback reducer' works by analysing room acoustics and 'nulling out' potential howl round frequencies. The Automix function allows the SRP-X700 to provide real time analysis of incoming signals and make adjustments to maintain the quality of the output.

Multiple operating modes with 10 outputs and the on board stereo power amplifier

A routing function allows the SRP-X700 to offer many different operating mode to support surround sound matrix switching or 'Zoned' speakers. In addition there is an on board 150W stereo power amplifier can be switched between high and low impedance modes.

Integrated Machine control and automation control interfacing

The SRP-X700 has extensive machine control capabilities with four CRTL-S control port (allowing a wired machine control interface to Sony CD, MD and VTRs), these can be flexibly assigned to the six matrix inputs. A parallel GPI interface can be assigned to simple control integration, additionally a serial RS-232 control port provide extensive control from professional presentation controllers. The 'one touch' function of the SRP-X700 means that it can provide a serial control signal to switch popular Sony projectors between accepting Composite and RGB formatted signals, so providing the minimum of disruption to the display signal.

Integrated wireless receiver module slots

Wireless technology is attractive in presentation systems as it simplifies installations and frees the presenters from being physically connected to the system by cables. Up to two WRU-806B, Sony wireless receiver modules, can be directly installed into the SRP-X700. Making it simple to integrate a high quality Sony wireless system into the presentation system. Sony has a full range of transmitters and antenna products to complete the wireless system, including handheld microphones (for example WRT-807), lapel microphone system (ECM-166 with WRT-805) and headsets (ECM-310 with WRT-805).

'One Touch' projector input format switching

The SRP-X700 can remotely control the selected input format of popular Sony projectors and Flat screen monitor displays, through either a serial or CRTL-S connector. This function allows the complete system to switch from displaying composite, component and PC graphics. It works by the SRP-X700 sending out a command signal based on the selected matrix input source. Applicable display products include: Sony VPL-FX50/PX31/PX21/PX15/PX10/ PS10/CX10/CS10.