General
Power requirements
DC 12 V
Power consumption
19 W (camera head only) 24.5 W (with the VCL-719BXS, HKC-SV1 Filter Servo Unit, and the RM-B750 Remote Control Unit connected)
Operating temperature
-10 to +45 °C (+14 to +113 °F)
Storage temperature
-20 to +60 °C (-4 to +140 °F)
Mass
Approx. 1.3 kg (2 lb 13 oz) (camera head only) Approx. 1.8 kg (3 lb 15 oz) (including camera head, tally unit)
Camera
Pickup device
3-chip 1/2-inch type 1.5-megapixel CCD
Effective picture elements (H x V)
1440 x 1080
Optical system
F1.4 prism system
Built-in filters
1: Clear, 2: 1/4ND, 3: 1/16ND, 4: 1/64ND
Lens mount
Sony 1/2-inch bayonet mount
Signal system
1080/59.94i, 1080/50i
Scanning system
59.94i/23.976PsF/29.97PsF selectable at 59.94i 50i/25PsF selectable at 50i
Sync system
Internal and External (3 state/VBS (BB))
Sensitivity (2000 lx, 89.9% reflectance)
F10 (typical)
Minimum illumination
0.003 lx (F1.4, +48 dB gain, with slow shutter mode at 64 frame accumulation)
Gain selection
-3, 0, 3, 6, 9, 12, 18, 24, 30, 36, 42, 48 dB
Shutter speed
1/60 (50i mode), 1/100, 1/250, 1/500, 1/1000, 1/2000 s
Slow shutter
2, 3, 4, 5, 6, 7, 8, 16, 32, 64 frame
Clear scan
50 to 200 Hz (50i mode), 60 to 200 Hz (59.94i mode)
Smear level
-120 dB (typical)
S/N ratio
52 dB (typical)
Registration
0.02% or less (all zones, without lens)
Geometric distortion
Below measurable level (without lens)
Modulation depth at 21 MHz
40% (typical) (with HD SDI output)
Signal inputs
Genlock video
BNC type (1), 3-level/2-level (VBS, VS)
Trigger
BNC type (1), TTL level
Signal outputs
Video
HD D-sub 15-pin (1) Y/Pr/Pb: 1.0 Vp-p, 75 O R/G/B: 1.0 Vp-p, 75 O HD/VD: TTL level (3 Vp-p) Sync: 0.6 Vp-p, 75 O
Tally
Mini-jack (1)
Other inputs/outputs
Remote
8-pin (1)
Lens
14-pin (1)
DC input
DC jack (1)
OFC
Single mode, LC optical, connectors (2)
Supplied Accessories
Lens mount cap (1)
Number plate (1)
Tally unit (1)
AC cable (1)
AC adaptor (1)
Operation manual (1)